Emitters

Emitters

StereoGraphics Emitters

This is a guideline for selecting an emitter based on platform and application for CrystalEyes. Most cases are covered here; any exceptions can be easily addressed by contacting support (NEED EMAIL ADDRESS HERE). The ESUN and ESGI have been upgraded. The new part numbers are listed below.

Desktop Emitter Information

All of these desktop emitters have these common features:

Range:

  • ~12'

Infrared "Spread":

  • Wide Mode: 120 degrees
  • Narrow Mode: 60 degrees

Power Supply:

  • PC: From Graphics Cards
  • MAC: From Power Supply

E2 Emitter & Cable kit

Manufacturer 1-Year Warranty

E2

  • Designed for PC/Unix desktop workstations using 3 pin mini-DIN connectors.
  • Emitter for workstations allowing control over the IR spread (for multi-user environments).
  • Connectors: 3-pin mini-DIN

E2SGI

  • Designed for SGI desktop workstations.
  • Emitter for workstations allowing control over the IR spread (for multi-user environments).
  • Connectors: 3-pin mini-DIN, SGI DB-9

E2SUN

  • Designed for SUN desktop workstations.
  • Emitter for workstations allowing control over the IR spread (for multi-user environments).
  • Connectors: 3-Pin Mini-DIN, 7-Pin Mini-DIN, 3.5mm stereo jack

E2MP Emitter & Cable kit

Manufacturer 1-Year Warranty

  • Designed for cross-platform desktop workstations (PC/Unix, SUN, SGI).
  • Emitter for workstations allowing control over the IR spread (for multi-user environments).
  • Connectors: 3-pin mini-DIN, SGI DB-9, 7-pin mini-DIN, 3.5mm stereo jack

E2MAC Emitter & Cable kit

Manufacturer 1-Year Warranty

  • Designed for Power Mac G4's with ATI or NVIDIA graphics cards.
  • OS X 10.2.3 or newer.
  • VGA passthrough connector has 3-pin mini-Din stereo connector for emitter plug-in.
  • 110-240 VAC auto detect power supply.
  • Emitter for workstations allowing control over the IR spread (for multi-user environments).
  • Connectors: VGA Pass-through connector

ELR2 Emitter & Cable kit

Manufacturer 1-Year Warranty

Range:

  • ~20'

Stereo Connector

  • 3-pin mini-DIN - 8ft (2.5m) cable

Infrared "Spread"

  • 120 degrees

Power Supply

  • 110V or 230V external power supply (output 12VDC) supplied

Features:

  • Designed for computers with 3 pin mini-DIN connectors in presentation rooms and demonstration areas.
  • Long range emitter designed for simple multi-emitter setup, allowing IR coverage in presentation rooms.
  • 3-pin mini-DIN output connector on rear panel.
  • Daisy Chain via large venue accessory kit includes extension cables

EXXR Emitter & Cable kit

Manufacturer 1-Year Warranty

Range:

  • ~70ft (21m)

Stereo Connector

  • 3-terminal connector block (For simple on-site connection) and BNC

Infrared "Spread"

  • 130 degrees

Power Supply

  • Universal Power Supply (output 24VDC) supplied

Features:

  • Long Range emitter with wide IR spread allowing very simple emitter setup in large theater-type rooms and also for multi-sided CAVE environments.
  • Daisy Chain via BNC T-connector (not supplied) for sync-signal only or serial connection using the 3-terminal connector block (also daisy-chains power).
  • Also available in 3-emitter bundle

EXXR Emitter & Cable kit

Manufacturer 1-Year Warranty

Range:

  • ~70ft (21m)

Stereo Connector

  • 3-terminal connector block (For simple on-site connection) and BNC

Infrared "Spread"

  • 130 degrees

Power Supply

  • Universal Power Supply (output 24VDC) supplied

Features:

  • Long Range emitter with wide IR spread allowing very simple emitter setup in large theater-type rooms and also for multi-sided CAVE environments.
  • Daisy Chain via BNC T-connector (not supplied) for sync-signal only or serial connection using the 3-terminal connector block (also daisy-chains power).
  • Also available in 3-emitter bundle

EPC2 Emitter & Cable kit

Manufacturer 1-Year Warranty

Range:

  • High Setting: ~12ft (3.6m)
  • Low Setting: ~6ft (0.9m)

Stereo Connector

  • SVGA pass-through connector attaches directly to emitter.

Infrared "Spread"

  • 120 degrees

Power Supply

  • Universal external power supply (output 12VDC) supplied

Features:

  • Designed for desktop and work area application.
  • Sync-doubling emitter that allows stereo support on standard PCs that do not have stereo-ready graphics systems.
  • Feature connector output on emitter allows other emitters or Monitor ZScreen to be attached. Requires 0920057-006 adapter.e